Yes. The shade twists off the base without tools, and the shades of our Rijks, Maera, Levora and Nordic Collections all share the same fitting. So you can mix and match them freely and give the lamp a different look whenever you like, with the shades we make today and with the ones we add later.
Product Features
Material
Crafted from rubberwood with a hand-finished surface, combining visible grain with a timeless design. The porcelain shade is 3D-printed and fired, thin enough to let the light glow through.
Weight 1.25 to 1.5 kg
Modular design
The shade twists off the base, so one lamp can have more than one look. Change it with the season, or with the room it stands in.
Our modular bases are built with the same fitting, so a shade is never tied to one base. The size tells you which base a shade is drawn for, so the proportions sit the way they were designed.
Modular Collection
Mix and match shades and bases
Twists off
In seconds, without tools
Glass, linen or porcelain
Swap the shade, keep the base
Cordless and rechargeable
No cable, no socket. It goes from the table to the terrace and back.
Cordless
USB-C rechargeable
Move anywhere
Battery
How long a charge lasts depends on the brightness you choose. On the charger overnight, full by morning.
10h
At full brightness
100h
At the lowest setting
USB-C
Charging
Light and dimming
One touch control: hold to dim, press to change the colour.
Light colour
Brightness
Dimmable* The colours shown are an approximation.
Specifications
- Collection
- Maera Collection
- Material
- Rubberwood, 3D-printed porcelain
- Dimensions
- 22.5 cm x Ø 12 cm
- Weight
- 1.25 to 1.5 kg
- Light source
- LED, 2200K / 2700K / 4000K
- LED lifespan
- 20,000 hours
- Light output
- 350 lm
- Battery
- 5000 mAh, 3.7 V
- Battery life
- 10 to 100 hours
- Charging
- USB-C rechargeable
- Control
- Touch
- Water resistance
- IP20
- In the box
- Lamp base, lampshade, USB-C charging cable, manual
- Warranty
- 2 years
Seen in Real Homes
Customer Reviews
Frequently Asked Questions
At full brightness it gives about 10 hours of light. Turned down low it runs for up to 100 hours.
350 lumen, enough to read by at the table. One touch takes you through three light colours, from a warm 2200K to 4000K. A tap moves the lamp through its light colours, and the tap after the last colour switches it off. Hold the touch point to dim, and every colour dims the same way.
With the USB-C cable from the box, in any phone adapter you already have; the adapter itself is not included. A full charge takes eight to twelve hours. Red means charging, green means full. Most adapters work, a plain 5V/1A one always does: if it hangs just short of green, switch to 5V/1A and it finishes.
The shade is built up in fine layers by a printer and then fired like any porcelain. That is what makes the wall thin enough for the light to glow through, and it is the only way to get a pattern this precise.
22.5 cm high and 12 cm across, about 1.25 to 1.5 kg.
The Maera Collection pairs a base of marble, travertine or wood with a shade of 3D-printed porcelain, a technique that makes shapes and textures possible that cannot be made by hand.
Dust it with a soft, dry cloth. Twist the shade off first if you want to reach everywhere.
It is made for indoors (IP20). On a covered terrace on a dry evening it is fine, but do not leave it out in the rain.
Yes, and that is by design. You replace the battery, not the lamp: a few screws and about ten minutes. We keep batteries in stock.
You May Also Like
Rechargeable Table Lamp
Cuyp Medium Classic Travertine
€179,00Rechargeable Table Lamp
Dou Small Dark Emperador Marble
€139,00Rechargeable Table Lamp
Anton – Espresso Brown
€65,00Rechargeable Table Lamp
Fynn – Dark Brown
€65,00Rechargeable Table Lamp
Anton – Black
€65,00Rechargeable Table Lamp
Avery – Dark Brown
€65,00Rechargeable Table Lamp
Luna Dark Emperador Marble
€159,00Rechargeable Table Lamp